Endress+Hauser Digital Recorder eco-graph c Betriebsanleitung Seite 92

Operation / set-up
92
Set-up, Digital input x, Telealarm submenu
This function is not available unless the device is equipped with the corresponding
function. In addition, the telealarm function must be activated in the "Basic settings -
Telealarm" menu.
Fig. 14: Set-up, Digital input x, Telealarm submenu
Release by Flank change H->L: Alarm when digital input is switched on (L->H) or switched
off (H->L).
SMS receiver x Select the recipient of the alarm, either as a text message on a mobile phone or
as a message to a PC via the PC software.
If SMS receiver x is selected, the mobile phone network and the telephone
number of the recipient must be entered.
If PC software is selected, only the modem telephone number at the recipient's
site must be entered here.
Set-up, Digital input x, "Control input" function
The following menu window only appears when using the digital input as a "Control
input" function:
Fig. 15: Set-up, Digital input x, Control input function
Identifier Name of measuring point (e.g. "pump") or description of the function carried out
with this input (e.g. "fault message").
Digital Recorder