Grundig VCR 6230 Bedienungsanleitung Seite 64

7 Troubleshooting
General Error Conditions
Failure
Cannot be operated
Battery not charging
Does not return to
the dock/station for
charging
Abnormal operation
Operates
abnormal noise.
Cleaning performance
is low / dust leaks
64 / EN
Cause and remedy
1. Charging level is low. Place the robot vacuum cleaner
to the charging dock so that it shall be aligned with the
charging poles. Bring the button on the left of the robot
vacuum cleaner to position "I"; and the vacuum cleaner
shall be operated automatically (When the robot vacu-
um cleaner is completely discharged, you shall need to
charge for a while for automatic operation).
2. The ambient temperature is very low (under 0 °C) or
very high (above 50 °C). Please use the robot vacuum
cleaner at an ambient temperature from 0 to 40 °C.
3. Please ensure that the on/off button on the side of the
robot vacuum cleaner is brought to position "I".
1. Please remove the robot vacuum cleaner and check if
the indicator light on the charging dock station is illu-
minated and ensure that both ends of the power adap-
tor of the charging dock are connected.
2. Loose contact. Please clean the spring contacts on the
charging dock and the charging contacts on the robot
vacuum cleaner.
3. Please ensure that the on/off button on the side of the
robot vacuum cleaner is brought to position "I".
1. There are too many obstacles around the charging
dock. Please place the charging dock to an area free
of obstacles.
2. The robot vacuum cleaner is too far away from the
charging dock. Bring the robot vacuum cleaner closer
to the charging dock and try again.
3. Make sure that the charging stand station is plugged
and there is energy.
Turn off and on again.
Foreign materials may have entered to the main brush,
with
side brushes and the wheels. Please turn off the robot
vacuum cleaner and clean it.
1. Dust container is full. Please clean the dust container.
2. Filter is clogged. Please clean or replace the filter.
3. Foreign materials may have entered to the main brush.
Please clean the main brush.
Robot Vacuum / User Manual