Grundig VCR 6230 Bedienungsanleitung Seite 55

5 Operation
B. Repositioning and remapping
If the robot vacuum cleaner is relocated or significant changes are made in the
environment, the robot vacuum cleaner tries to reposition to adapt to the new
environment and may create the relevant map again. The details are as follows:
a. If repositioning is successful, the robot vacuum cleaner continues on cleaning;
b. If repositioning is unsuccessful, the robot vacuum cleaner starts over to scan in
order to make the mapping again.
WARNING: Ensure that the robot vacuum cleaner
A
always starts the cleaning operation from the
charging dock.
During cleaning, do not intervene in the robot vacuum cleaner or change its location.
Room cleaning mode (Supported by the relevant mobile application
only)
You may specify the rooms you want to be cleaned with the mobile application, then
the robot vacuum cleaner cleans only the room(s) that is/are marked in the map.
C
D
√A
√B
• The robot vacuum cleaner may also enter the areas other than the selected area
after it starts cleaning; thus please remove the obstacles on the ground around the
selected area. Area selection does not provide a secure isolation.
• Regional cleaning may only be started after the robot vacuum cleaner successfully
creates a map.
Regional cleaning mode (Supported by the relevant mobile
application only)
X
Robot Vacuum / User Manual
The dimensions of the region can be
C
determined by holding from the right bottom
corner. In the meantime, the dimensions of the
displayed area are written on the screen with
the dotted line.
55 / EN