Grundig VCR 6230 Bedienungsanleitung Seite 62

6 Cleaning and maintenance
6.3 Cleaning and installation of the side brush
In the long term use, wash the side brush with warm water in order to eliminate the
shape deformation. Install it to the robot as it is shown after it has dried.
6.4 Cleaning of the sensors
Clean the sensors and charging pins/electrodes regularly and remove the dust using
a dry and soft cloth or a cleaning brush.
Information: You get a notification via the application when sensor cleaning is
required.
Ön tampon
çarpma sensörü
62 / EN
Şarj pinleri
Wheel shaft
Tekerlek mili
Tampon sensörü
Robot Vacuum / User Manual