Grundig VCR 6230 Bedienungsanleitung Seite 51

5 Operation
WARNING: If the charging level is too low, the
A
cleaning cannot be started. Please charge the
appliance before starting the cleaning.
WARNING: Before the cleaning, tidy up all cables
A
to prevent disconnections due to entanglement/
pulling of the cables and to prevent damage to
the furniture.
WARNING: In the automatic cleaning mode, if the
A
area to be cleaned is less than 10 square meters,
the cleaning is performed twice as default.
WARNING: Do not move the charging dock
A
during cleaning and make sure that the station
is plugged; otherwise the robot vacuum cleaner
may not be able to return for recharging.
Pausing
Press " " button on the body to stop the robot vacuum cleaner while it is operating.
The robot vacuum cleaner switches to pause mode.
Automatic charging: The robot vacuum cleaner returns automatically to recharge
after the cleaning is completed.
Manual charging: The robot vacuum cleaner returns automatically to the charging
station when you press " " button on the upper body when it is in the pause position.
A. If the operation is paused, press " " button to recharge automatically.
B. If the robot vacuum cleaner is caught up anywhere and cannot find the charging
dock, please move the robot vacuum cleaner to the charging station yourself to
allow it to be charged.
Point cleaning
Bring the robot vacuum cleaner to the area to be cleaned and press
" " button twice. When the mode is activated, the robot vacuum
cleaner shall clean a square area of 1.5 x 1.5 m by considering itself
as the center.
Robot Vacuum / User Manual
51 / EN