Herunterladen Inhalt Inhalt Diese Seite drucken

IFM Electronic ecomot100 Starter-Set R 360 EC2051 Benutzer- Und Installationsanleitung Seite 22

Steuerung für den robusten und mobilen einsatz
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

R 360
STARTER SET
Safety instructions
Observe the information of the description. Non-observance of the notes,
operation which is not in accordance with use as prescribed below, wrong
installation or handling can result in serious harm concerning the safety of
people and plants.
The instructions are for authorised people according to the EMC and low
voltage guidelines. The device must be installed and commissioned by a
skilled electrician (programmer or service technician).
This description is part of the device. It contains texts and drawings concern-
ing the correct handling of the controller and must be read before installation
or use.
Since the device must be externally supplied (12/24 V DC) it must be ensured
that the external voltage is generated and supplied according to the criteria
for safe extra-low voltage (SELV) as this voltage is supplied without further
measures to the connected controller, sensors and actuators.
The wiring of all signals in connection with the SELV circuit of the device must
also comply with the SELV criteria (safe extra-low voltage, safe electrical sepa-
ration from other electric circuits).
If the externally supplied SELV voltage is externally connected to ground (SELV
becomes PELV), the responsibility lies with the user and the respective national
regulations for installation must be complied with.
All statements in these operating instructions refer to the device the SELV
voltage of which is not grounded.
The terminals may only be supplied with the signals indicated in the technical
data or on the device label. Only potential-free contacts or potentiometers
may be connected to the mini DIN sockets of the simulator.
The controller can be operated within a wide temperature range according to
the technical specification indicated below. Due to the additional self-heating
the housing walls can have high perceptible temperatures when touched in
hot environments.
In the case of malfunctions or uncertainties please contact the manufacturer. .
22
PAGE
All manuals and user guides at all-guides.com

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ecomat 100 ec2051

Inhaltsverzeichnis