Operation; Finnish Sauna Mode - Sentiotec CP-RCB-090 Montageanleitung

Instructions for use for the user

6. Operation

WARNING!
Risk of fire
Flammable objects that are placed on the heater will ignite and cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects are located on the heater
before operating it.
A sauna control unit is used to operate the sauna heater. For information on how
to operate the sauna control unit, read the operating instructions for the device
used. Please note that only sauna control units without remote start or preset
time functions are permitted for use with the Concept R combi sauna heater.
With the optional safety shutdown feature (CP-R-SWL), the Concept R
combi sauna heater is also suitable for sauna control units WITH remote
start and preset time functions.

6.1. Finnish sauna mode

In Finnish sauna mode only the heating system operates. Dry heat is provided.
The temperature in the room is high (80 to 100 °C). The humidity level is low
and does not exceed 10%. The temperature in the sauna cabin is controlled by
your sauna control unit.
At the end of the sauna session you can pour water over the stones. Pour water
over the stones using a sauna ladle. The water evaporates and the humidity in
the sauna cabin is increased.
WORLD OF WELLNESS
p. 18/26