Zipper ZI-HS16E Betriebsanleitung Seite 42

16.2.3 Free a jammed log
Stack as you work. This will provide a safer work area, by keeping it uncluttered, and avoid the danger
of tripping, or damaging the power cord.
17 MAINTENANCE
Before carrying out any maintenance work, ensure that moving parts are stationary, that
the machine is disconnected from the mains supply and / or that the PTO shaft is
uncoupled.
17.1 Maintenance plan
Activity ZI-HS16E
After each oil
Check oil level change or every
8 oh*
Change
1 x per year
hydraulic oil
Change
gear oil
*) oh ... operating hours
17.2 Replacing Oil
Check the oil level regularly. Change the hydraulic oil completely at least once a year.
Always dispose of used oil correctly and never throw it into household waste or sewage!
The hydraulic system of the log splitter is a closed system with oil tank, oil pump and control valve. The
oil should be changed completely once a year.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
3. Return the splitter wedge to the starting
position.
retract control lever to lift wedge above
the height of log to be split.
WARNING
Model
ZI-HS22EZ ZI-HS30EZ
After each oil After each oil
change or every change or every
8 oh 8 oh
1 x per year 1 x per year
after 25 oh, after 25 oh,
subsequently subsequently
every six months every six months
or every 250 oh or every 250 oh
NOTICE
MAINTENANCE
Operate the spring-loaded
ZI-HS30Z
After each oil
change or every
8 oh
1 x per year
after 25 oh,
subsequently every
six months or every
250 oh
42