Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13 SAFETY
This section contains information and important notes on safe start-up and handling of the machine.
For your own safety, read these operating instructions carefully before putting the machine into
operation. This will enable you to handle the machine safely and prevent misunderstandings as
well as personal injury and damage to property. In addition, observe the symbols and
pictograms used on the machine as well as the safety and hazard information!
13.1 Intended use of the machine
The machinery is intended exclusively for the following activities: Sweep of paved areas and paths; with
mounted snow blade also for removing snow from private path in the specified limits.
ZIPPER MASCHINEN GmbH assumes no responsibility or warranty for any other use or
use beyond this and for any resulting damage to property or injury.
13.1.1
Technical restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity:
Temperature (for operation):
Altitude above sea level
13.1.2
Prohibited Use / Hazardous misapplications
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine under explosive conditions
-
Operating the machine outside the specified power range
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
The improper use or disregard of the versions and instructions described in this manual will result in the
voiding of all warranty and compensation claims against Zipper Maschinen GmbH.
13.2 Safety instructions
Warning signs and/or stickers on the machine which are illegible or have been removed must be
replaced immediately!
Local laws and regulations can determine the minimum age of the operator and restrict the use of
this machine!
In order to avoid malfunctions, damage and health impairments, the following measures for safe working
must also be observed:
Do not split soaked wood.
Only split the wood upright in the direction of the grain!
Do not split wood that contains foreign objects such as nails, cables, etc.
Operate the machine only in well-ventilated rooms or outdoors.
Never operate the machine outdoors when it is raining.
Choose a level, vibration-free, non-slip surface as the installation location.
Ensure sufficient lighting conditions at the workplace.
Keep the working area free of obstacles (e.g. pieces of wood, leftover wood, etc.).
Before each use, check the machine for its perfect condition (tight fit of hoses and screws,
operability of the switch-off devices, etc.).
Never leave the running machine unattended.
The machine may only be operated, serviced or repaired by persons who are familiar with it
and who have been informed of the dangers arising during this work.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
N O T I C E
max. 50 %
+5° C to +40° C
up to 1.000 m
SAFETY
29
Werbung
