Zipper ZI-HS16E Betriebsanleitung Seite 39

15.2 ZI-HS22EZ und ZI-HS30(E)Z
The 3-point attachment to the tractor makes the log splitter easy to move. Before transport, make sure
that the log splitter is correctly and securely attached to the tractor and that the safety chains are in
place. Make sure that the splitter is raised high enough to avoid obstacles during transport. Never
transport the log splitter when the PTO shaft switched on! In driving situations, e.g. when turning,
parking or passing crossings, take into account the excess length caused by the attached log splitter.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
B. Fold out the transport handle: The transport handle
is normally fixed in an upright position. To transport
the log splitter, the transport handle must be folded
out as shown in the illustration on the left. To unfold,
release the pin (1), unfold the transport handle (2) and
fix it in the unfolded position using the pin (3).
WARNING
 When using a crane for lifting, attach the crane hook
only to the intended lifting point (a) - see illustration on
the left.
 Never attach the crane hook to the transport handle
(b)!
 Before moving the log splitter, make sure that the
cover on the oil tank is firmly closed!

To move the log splitter, grasp the transport handle (b)
and carefully tilt it back!
A. Positioning the transport wheel: Pull out the lock pin,
turn down the support wheel to the transporting
position.
TRANSPORT
39