Cleaning And Care; Cleaning With The Brush - Silvercrest SRR 3.7 D3 Bedienungsanleitung

2) Press the On/Off switch
and the long hair trimmer
up.
3) Once you have finished trimming, press the On/Off switch
again to turn off the appliance. The blue control lamp
goes out.
4) Clean the long hair trimmer
more thorough cleaning, read the section Cleaning and care.

Cleaning and care

DANGER! ELECTRIC SHOCK!
► Before cleaning the device, disconnect the mains adapter
the mains power socket! There is a risk of electric shock!
ATTENTON!
► Do not use abrasive, chemical or caustic cleaning agents to
clean this appliance. This will irreparably damage the appliance.

Cleaning with the brush

Cutting unit
Clean the 3 shaving heads of the cutting unit
using the brush
1) Take hold of the cutting unit
3
recesses
2) Tap the cutting unit
3) Use the brush
4) Replace the cutting unit
snaps into place and is seated firmly.
│ GB │ IE
■ 12
6
4
e
.
and pull it off.
2
on a flat surface or blow off the hair cuttings.
e
to remove any remaining hair cuttings.
2
. The shaver starts the cutting unit
, the blue control lamp
4
with the supplied brush
2
2
with three fingers in the grip
flush on the appliance. Ensure that it
7
lights
7
e
. For a
q
after every shave
SRR 3.7 D3
2
6
from