E
Press quickly the [mode] button to introduce upper tolerance limit.
Refer to chapter V.3 (Introduction of preset value) to introduce the upper tolerance limit.
V.5.1.2 Introduction of the lower limit
Keep [mode] button pressed until lower tolerance limit is displayed.
Refer to chapter V.3 for introduction of lower tolerance limit (i.e. preset values).
V.5.1.3 Return to tolerance mode
Keep [mode] button pressed until set indicator is cancelled.
V.5.2 Instruments with tolerance indications (diodes)
The preset tolerance limits will be the references for activating the LED.
V.5.2.1 How the LED are working
The LED will be activated for 5 sec. as soon as the measured value is stable.
This system allows to extend the battery life.
63