Truma DuoControl CS Gebrauchsanleitung Seite 45

DuoControl CS
3.5 Crash sensor (CS)
The gas pressure regulator has an integrated safety shut-o device
(crash sensor) according to UN/ECE regulation 122. The installed
crash sensor stops the gas supply immediately when an accident oc-
curs. It triggers at a directly acting acceleration of 4.0 g ± 1.0 g . This
corresponds to an impact speed of approx. 15 to 20 km/h.
If the yellow reset button is pressed in (Fig. 4-1), the crash sensor is
active. The gas pressure regulator is ready for operation. This means
that the gas system is supplied with gas.
If the yellow reset button is protruding (Fig. 4-2), the crash sensor was
triggered. The gas pressure regulator is not ready for operation. This
means that the gas system is not supplied with gas.
Fig. 4
 Unusually strong vibrations while driving may lead to the crash
sensor triggering inadvertently. In this situation, the flow of gas is
interrupted. To reset the crash sensor, see chapter „Resetting the
reset button".
3.6 Screw aid
The screw aid guarantees the required tightening torque. Damage to
the union or the seal is therefore prevented.
Use the included screw aid to attach and remove the high-pres-

sure hose.
50020-00980 00 08/2022
1
Product description
2
EN 45