OHAUS Frontier FC5706 Bedienungsanleitung Seite 16

EN-10
3.5 Starting and stopping the centrifuge
3.5.1 Starting the centrifuge
To start the centrifuge, make sure that the lid is closed and then press the key "Start" (9), (refer to figure 22). With
the key "Start" (9) you can start runs with manually pre-selected parameters. When the respective pre-selected
running time has ended then the centrifuge will stop automatically or you can interrupt each run with the key
"Stop" (10).
3.5.2 The "STOP" key
The run can be interrupted at any time by pressing the "Stop" key (10) (See figure 23). After pressing the key the
centrifuge decelerates with the respective pre-selected intensity until it reaches standstill.
A-3
Figure. 22
Figure. 23
TM
Frontier Centrifuge FC5706
9
1
10
10