DigiTech RP1000 Bedienungshandbuch Seite 15

Stomp Loop
Connect the
stompbox Output
to the RP1000
StompLoop Return.
Amp Loop using Guitar Amp´s Pre Amp
Connect the RP1000
Amp Loop Send to
the amp's Input.
Connect your guitar
to the RP1000's Input.
Amp/Mixer switch on 1/4"
outputs is set to AMP.
Connect the
RP1000 Stomp
Loop Send to the
stompbox Input.
Connect your guitar
to the RP1000's Input.
Amp/Mixer switch on 1/4"
outputs is set to AMP.
Connect the RP1000
Line Out to the amp's
Connect the amp's Loop
Loop Return.
Send to the RP1000
Amp Loop Return.
Connect the RP1000's
Left (mono) Line Output
to the amp's Input.
15