cecotec CONGA GYRO HOME Bedienungsanleitung Seite 58

ENGLISH
Edge Mode
When this mode is selected, the robot vacuum cleaner will clean along walls and around
-
furniture (e.g., table or chair legs).
Press the Edge cleaning button on the remote control or on the app.
-
Back Home mode
Press the Back home button on the robot vacuum cleaner, on the remote control, or on the
app (with a house icon) to send the robot vacuum cleaner to the self-emptying base. The
robot vacuum cleaner will stop vacuuming until it reaches the base.
Manual mode
Select the manual cleaning option in the app or use the directional arrows on the remote
control to manually control your robot vacuum cleaner.
Power Level function
Select the power level on the remote control or on the app to control the robot vacuum
cleaner's suction power level during cleaning. There are 3 power levels: Eco, Normal, and
Turbo.
Cleaning schedule
To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
5. CLEANING AND MAINTENANCE
High-efficiency filter. Fig. 8.
The high-efficiency filter is designed with fibres that help trap dust particles, dust mites,
-
pollen. It is very important to periodically clean the filter, to prevent these particles
from building up in the filter, causing efficiency loss. It is convenient to carry out this
maintenance once a week.
- It is recommended to replace the high-efficiency filter with a new one without exceeding
160 cleaning hours.
Recommendation
You can remove dirt from the high-efficiency filter with a small brush or gently shake the filter
on a hard surface to remove the dust. The high-efficiency filter cannot be washed.
58