Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting up the device
5
Installation of the hood - side mounting
version
g
Wood screws
4 x O4x(g+16)
* Side moldings are not included in the set
They should be selected depending on the dimensions of the cabinet
D - internal width of the cabinet [mm]
g=(D-500)/2 [mm] - width of the side panel
4 x O4 - mounting holes
5.4 Electrical connections
The network voltage shall correspond to
the voltage indicated at the plate placed
inside the hood. If the hood is equipped
with a plug, insert it into the socket com-
plying with the applicable requirements,
and located in the easily accessible
place. If the hood is not equipped with a
plug, the hood installations shall be per-
formed by a person having the required
authorizations (such as electrician).
5.5 Storage
• If you do not intend to use the appli-
ance for a long time, please store it
carefully.
• Please make sure that the appliance is
unplugged, cooled down and totally dry.
• Store the appliance in a cool and dry
place.
• Keep the appliance out of the reach of
children
Cooker Hood / User Manual
D
Cabinet door
Side
panel
*
Hood
Bottom of
min. 200
the cabinet
5.6 Handling and transportation
• During handling and transportation,
carry the appliance in its original pac-
kaging. The packaging of the appliance
protects it against physical damages.
• Do not place heavy loads on the appli-
ance or the packaging. The appliance
may be damaged.
• Dropping the appliance will render it
non-operational or cause permanent
damage.
15 / EN
Werbung
