Beko HNU 61425 B Bedienungsanleitung Seite 14

Setting up the device
5
5.2 Installation accessories
Cooker Hood
User Manual
EN - PL
01M-9208003200-5222-01
1. Hood
2. 4x5x35 mm Screw
3. ø150/ ø120 plastic adapter
4. User Manual
5. Blower flaps
5.3 Installation of the device
1. Prepare the cabinet for the installation
of the hood, cut the hole in the bottom
of the cabinet in accordance with the
drawing.
Preparation of the cabinet
596
Front glass contour
Cabinet door
14 / EN
Cut hole
510
2. Remove the grease grease filters
3. Carefully insert the hood into the previ-
ously cut hole, hold the hood with one
hand or ask an additional person for
help. Screw in the bolts / screws cho-
osing one mounting variant a-fixing to
the top of the cabinet, b- fixing to the
side of the cabinet.
Installation of the hood - top mounting
version
60 380
O150
4. When attaching the hood to the top of
the cabinet, prepare holes in the shelf
of the cabinet according to the dimen-
sions shown in the drawing. However,
in the case of a side variant, the side
skirts should be prepared as described
in
Cooker Hood / User Manual
4 x M5
Hmin=160/235
4xO5
Hmax=165/240