Werbung
Verfügbare Sprachen
Verfügbare Sprachen
vacumming.
Open Canister after vacuum packaging
In order to open the canister, you need to press the "Release "button on the
canister cover.
Note:
At the beginning of the vacuum packaging in a canister or a vacuum
bowl, slightly press down the cover or on the hose adaptor to ensure no
loose of the hose and to avoid air leaking through the gap between the
cover and the canister top rim for a few seconds.
To test vacuum, simply tug on the cover. It shall not move;
Different canisters are available in the market and also from Bigland. The
operation procedure will be a little different. Please refer to the individual
manual for the specific canister.
Ⅴ. Marinate meat with a marinate Bowl
1.Take out the hose accessory from inside cover, insert it to canister port on
unit and the center hole of canister cover– Fig. 1
2.Check the LED status of "Pressure" to
confirm the desired vacuum pressure
(Normal/Gentle) according to the type of food.
The default option is Normal mode.
3.Press Marinate button to start working– Fig. 2.
The indicator light glints during the course. It will release air automatically
after finished vacuum, this is for 1 working cycle, this machine will total
working for 5 cycles. It takes about 6 minutes to finish the process.
- 13 -
Fig.1
Fig.2
Werbung
