VEVOR VS5164 Handbuch Seite 13

7.The vacuum packaging is done. Rock the handle to open the cover and
take out the packed bags – Fig. 4
NOTE:
For best sealing effect, it is better to let the appliance cool down for

1 minute before using it again. Wipe out any excess liquid or food
residue in the vacuum chamber after each bag packaged.
Do not seal one after another continuously to avoid overheat of the

sealing element. The machine will reject if this "seal" button is
activated within 15 seconds of the last activation.
Your appliance can work only on the specific bags provided by us.

Do not attempt to use other bags not intended for vacuum
packaging. .
Cut the bag straight across with scissors to open a sealed bag.

Vacuum packaging with a bag using Pulse Vacuum
Ⅲ.
1. Press Pulse Vacuum button, the unit start to vacuum the bag , observe the
status of the vacuum pressure inside the bag . loose the Pulse Vacuum
button immediately when the desired vacuum pressure is achieved.-- Fig 1
- 11 -
Fig.4
Fig.1