VEVOR VS5164 Handbuch Seite 14

2. Press the Manual Seal button when the Vacuuming have been completed,
the unit start to seal the bag automatically—Fig.2
Ⅳ. Vacuum package in a Canister & Vacuum Bowl
1.Wipe canister cover, canister base and ensure they are clean and dry.
2.Put the items into the canister and do not fill up too full so that the cover
can be in good contact with the canister bowl rim. Clean the cover rim of the
canister and bottom seal gasket of the canister cover;
3. Insert one end of the hose into the air intake
and another end of the hose into the center
hole of the canister cover– Fig. 1
4. Check the LED status of "Pressure"
and make sure if it is in "Normal" setting;
5. Press the canister button to start vacuuming– Fig. 2. To ensure there is no
air leaking between the cover and the canister, use your hand to push
down the cover at the beginning of the vacuuming work. The machine will
stop automatically when enough vacuum pressure is achieved.
6. Take out the hose tube from the canister or bowl immediately first after the
job is completed.
Note: When moist food are under vacuuming, moisture will be stored in
adaptor. Remember to clean up the adaptor if there is water before
- 12 -
Fig.2
Fig.1
Fig.2