Herunterladen Diese Seite drucken

Therabody THERAGUN PRO Plus Bedienungsanleitung Seite 4

Vorschau ausblenden Andere Handbücher für THERAGUN PRO Plus:

Werbung

EN
meters) of a bathtub, shower, or pool. Do not use the device or charger on wet surfaces, and do not expose the charger
to moisture, rain, or snow. Do not use the device or its compatible charger in the presence of explosive atmospheres
(gaseous fumes, dust, or flammable materials). Sparks may be generated, possibly causing a fire.
DO NOT OVERCHARGE. Do not leave the device connected to the USB-C charging cable for more than one hour
after the battery has been fully charged. The battery includes a protection system to avoid the risk of overcharging.
However, overcharging may reduce its life over time.
DO NOT CRUSH, DROP, OR DAMAGE THE DEVICE OR CHARGER. Do not use a USB-C charging cable that has
received a sharp blow, been dropped, run over, or damaged in any way.
BATTERY CHEMICALS CAUSE SERIOUS BURNS. Never allow the internal battery to come into contact with the skin,
eyes, or mouth. If a damaged battery leaks chemicals, use rubber or neoprene gloves to dispose of it. If skin is exposed
to battery fluids, wash with soap and water and rinse with vinegar. If eyes are exposed to battery chemicals, immediately
flush with water for 20 minutes and seek medical attention. Remove and dispose of contaminated clothing.
DO NOT SHORT CIRCUIT. A battery will short circuit if a metal object makes a connection between the positive and
negative contacts on the battery or the 16V connector. Do not place a battery near anything that may cause a short
circuit, such as coins, keys, or nails in your pocket. A short-circuited battery may cause fire and personal injury.
DEVICE DISPOSAL. This device contains a lithium-ion battery, and care must be taken upon disposal of the device.
Before disposal of this device, please review your local laws and requirements surrounding Lithium-Ion Battery disposal.
The preferred method of disposal is recycling the whole device.
SERVICE. If the device is not working properly, has received a sharp blow, or has been dropped, damaged, left outdoors,
or dropped into water, then do not use it. Do not attempt to repair or disassemble the device which may result in an
electric shock or fire.
USAGE. Discontinue use of the Theragun PRO Plus device if you are feeling pain or discomfort. If at any point during
the treatment you feel pain or discomfort beyond what's expected from an ice pack or a hot shower, stop the treatment
immediately and remove the device. Discontinue use of the device if it overheats or becomes uncomfortably hot. Do
not place your finger between the attachment and the end of the arm, as this may cause pinching and injury.
USB-C CABLE CARE. Unplug the USB-C charging cable when not in use. Pull the plug, not the cable, to reduce the
risk of damage to the electrical plug and cable. Store cable to ensure it is not stepped on, tripped over, or otherwise
subjected to damage or stress. Keep the cable away from heated surfaces, oil, and sharp edges. Never operate this
appliance if it has a damaged cable or plug if it is not working properly, if it has been dropped or damaged, or dropped
into water. Do not stretch the charger cable or place the cable under strain. Do not handle the cable with wet hands. For
long-term storage, store with a fully charged battery. Therabody is not responsible for damages that may occur due to
the use of third-party chargers.
DO NOT OPERATE UNDER BLANKET AND PILLOW. Excessive heating can occur and cause fire, electric shock, or
injury.
CHARGING. There is only one correct USB-C insertion position on the device. Do not force the cable into place. The
Therabody logo should be facing upright when inserted. Fully charge the device at least once every six months to
prevent device and battery damage.
STORING THE THERAGUN PRO Plus DEVICE AND CHARGING CABLE. Store in a cool, dry place. Only charge
the device when the ambient temperature is between 0°C/32°F and 40°C/104°F. Do not store the device, or USB-C
charging cable where temperatures may exceed 40°C/104°F, such as in direct sunlight, in a vehicle, or in a metal
building during the summer.
DEVICE CARE. The Theragun PRO Plus device is NOT waterproof. The device is not machine washable. Do not place
or store the device where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. Do
not reach for an appliance that has fallen into or come into contact with water. Unplug immediately. Clean the device
according to the instructions found in the "Care and Cleaning" section above.
DO NOT DISASSEMBLE. Disassembly or incorrect reassembly may result in the risk of electric shock, fire, or exposure
to battery chemicals. The warranty will be void if the device, batteries, or charger are disassembled or if any parts have
been removed.
Automatic Shut Off
Theragun PRO Plus device will automatically shut off if:
Use is not detected on the home screen for 3 or more minutes
The device is paused for 10 or more minutes
After 15 or more minutes of continuous percussive treatment
To turn off Theragun PRO Plus device, press and hold the center button until the device powers off.
For full warranty information, please visit www.therabody.com/warranty.
4
LIMITED WARRANTY
Legal Manufacturer:
Therabody
Attn: Customer Service
6100 Wilshire Blvd, Suite 200
Los Angeles, CA 90048
Please note, this is not a return address or a retail location. No products or packages will be accepted at this location.
Customers who are in need of product support should visit https:/ /www.therabody.com/us/en-us/support/support.
html or https:/ /www.therabody.com/anz/en-au/support/support.html for the available contact methods.
FDA-Registered
Limited Warranty Only With Authorized Retailer Purchase
© 2023 Therabody, Inc. All Rights Reserved.
Patents at www.therabody.com/patents
Imported and Distributed by:
Therabody International Limited, Marine House, Clanwilliam Place, Dublin, Ireland
Therabody UK Limited, 55 Ludgate Hill, 2nd Floor, London EC4M7JW
Therabody Australia Pty Ltd, Waterman Business Centre, Suite 16, C307, Level 3
Ringwood Vic 3134, Australia
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Radio equipment operates at a frequency band(s) of 24022480M Hz. Maximum radio frequency power is-1.87 dbm.
In the Australian market, the Theragun PRO Plus product warranty is 1 year.
For Australian Market Only: The purchase of this device is accompanied by a limited warranty. For complete
details about the rights afforded to you under this warranty, visit https:/ /www.therabody.com/anz/en-au/
warranty-support/.
Made in China
Please follow your local
council's guidelines for
disposal of electrical waste.

Werbung

loading