Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
MT
Current strength
I
................................................. 16 A
1
I
................................................. 25 A
2
Rated power ......................max. 1000 W
Rated speed n ...........9000 - 23000 min
Air speed ........................max. 250 km/h
Protection type................................. IPX0
Weight (without battery) .............. 2.78 kg
Sound pressure level
(L
) ................... 74.1 dB (A), K
pA
Sound power level (L
guaranteed ............................ 96 dB(A)
measured ...............94.47 dB; K = 2 dB
) .......≤ 2.5 m/s
Vibration (a
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
Charging time
(min)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart
PLGS 2012 A1
24
= 3 dB
pA
)
WA
; K= 1.5 m/s
2
PAP 20 A1
PAP 20 A2
PAP 20 B1
60
45
35
35
35
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
-1
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Charging time
The device is part of the Parkside X 20 V
2
TEAM series and can be operated with
batteries of the Parkside X 20 V TEAM
series.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAP 20 A1, PAP 20 A2, PAP 20 A3,
PAP 20 B1, PAP 20 B3, Smart PAPS 204 A1.
We recommend charging these batteries
with the following chargers: PLG 20 A1,
PLG 20 A2, PLG 20 A3, PLG 20 A4,
PLG 20 C1, PLG 20 C3, PDSLG 20 A1,
Smart PLGS 2012 A1.
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
PAP 20 A3
PAP 20 B3
90
120
60
80
45
60
45
60
40
40
Smart
Smart
PAPS 204 A1
PAPS 208 A1
120
80
50
50
40
210
165
120
120
50
Werbung
