Parkside PSG 85 B2 Originalbetriebsanleitung Seite 21

Scope of delivery
Unpack the device and check for complete-
ness:
• Chain sharpener with pre-installed
grinding discs
• Handgrip
• Chain tensioning unit with retaining screw
• Adjusting screw with fi xing nut
• Two screws with nuts and washers for
fi xing to the table
Dispose of the packaging material properly.
Overview
1 On/off switch
2 Grinding head
3 Grinding disc cover
4 Handgrip
5 Mounting screws for grinding
disc cover
6 Adjusting screw with adjusting
nut for the depth stop
7 Chain guide rail
8 Grinding base
9 Adjusting nut for the chain ten-
sioning unit
10 Scale for sharpening angle
(+35° to -35°)
11 Chain tensioning unit with rotary
plate
12 Tension lever for fi xing chain
13 Adjusting screw with adjusting
nut for the chain feed
14 Stop
15 Cable holder (not depicted)
16 Mains connection cable
17 Grinding disc
18 Viewing guard
19 LED lamp (not depicted)
20 Ventilation holes (not depicted)
21 Worktop
22 Stop notch
23 Screws
24 Nuts
24a Washers
25 Cutting tooth
26 Depth gauge nib
17a Grinding disc nut
Description of functions
The device must be securely fi xed to a work-
top before the initial start-up. It is powered
by an electric motor with thermal protection
and restart stop for additional safety.
The sharpening angle can be easily adjust-
ed from -35° to +35°. The chain guide rail
has a variably adjustable stop. Sharpening
is carried out by swivelling the grinding
head. The device is provided with a view-
ing guard for the protection of the user.
Please refer to the descriptions below for
information on how the operating elements
work.
Technical data
Chain Sharpener ............PSG 85 B2
Nominal input
voltage .................... 230-240 V~, 50 Hz
Power consumption ..85 W (S2 15 min)**
Idle power consumption ................. 23 W
Protection class ................................
Protection type ................................IP X0
Rated idle speed n
Adjustment angle ................ 35° left/right
Grinding disc dimensions
Outer diameter ................... Ø 104 mm
Bore hole ............................. Ø 22 mm
Thickness ................................ 3.2 mm
Rotational speed ............ max. 40 m/s*
Weight (incl. accessories) ............ 2.20 kg
GB
................ 5000 min
0
MT
II
-1
21