DAB BMH Installationsanweisung Und Wartung Seite 19

CONTENTS
1. WARNINGS
2. RESPONSIBILITY
3. APPLICATIONS
4. TECHNICAL DATA AND RANGE OF USE
5. MANAGEMENT
5.1. Storage
5.2. Transport
5.3. Weight
6. INSTALLATION
7 ELECTRICAL CONNECTION
8 STARTING UP
9 SPEED ADJUSTMENT
10 MAINTENANCE
11 TROUBLESHOOTING
1. WARNINGS
1.1
Read this documentation carefully before installation.
It is indispensable to have the electrical and hydraulic connections made by
skilled personnel in possession of the technical requirements indicated by the
safety regulations in force in the country in which the product is installed.
Failure to comply with the safety regulations not only causes risk to personal
safety and damage to the equipment, but invalidates every right to assistance
under guarantee.
1.2
The term skilled personnel means persons whose training, experience and
instruction, as well as their knowledge of the respective standards and
requirements for accident prevention and working conditions, have been
approved by the person in charge of plant safety, authorizing them to perform
all the necessary activities, during which they are able to recognize and avoid
all dangers. (Definition for technical personnel IEC 364).
1.3 Check that no damage has been done during transport or storage.
particular, ensure that the external casing is perfectly entire and in excellent
condition.
2. RESPONSIBILITY
The Manufacturer does not ensure good operation of the circulator if it is tampered with or
modified or made to operate at values beyond the data on the plate.
The Manufacturer also declines all responsibility for possible errors in this booklet, if due to
misprints or errors in copying. The company reserves the right to make any modifications
to products that it may consider necessary or useful, without affecting the essential
characteristics.
The appliance is not intendend for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsable for their safety. Children should be supervised to ensure that they do not play
with the appliance.
3. APPLICATIONS
The single version circulators in series BMH, BPH, and the twin versions in series DMH,
DPH have been designed for the circulation of:
- hot water in heating systems.
- water in industrial hydraulic circuits.
- water in conditioning circuits.
No circulator may be used for circulating domestic water or liquid foodstuffs.
ENGLISH
18
Page
18
18
18
19
20
20
20
20
20
21
22
22
23
23
In