HEIDENHAIN POSITIP 8000 Installationsanleitung Seite 21

3.3.2 Accessories
Software options need to be enabled on the
product via a license key. Before you can use
the associated hardware components, you
need to enable the respective software option.
The following accessories can optionally be ordered from
HEIDENHAIN:
Accessories Name
For installation
USB connecting cable
KT 130 edge finder
TS 248 touch probe
TS 248 touch probe
Adapter connector 1 Vpp
Power cable
For mounting
Duo-Pos stand
Multi-Pos stand
Multi-Pos holder
Single-Pos stand
Mounting frame
3.4 In case of damage in transit
Have the shipping agent confirm the damage
Keep the packaging materials for inspection
Notify the sender of the damage
Contact the distributor or machine manufacturer for
replacement parts
If damage occurred during transit:
Keep the packaging materials for
inspection
Contact HEIDENHAIN or the machine
manufacturer
This applies also if damage occurred to
requested replacement parts during transit.
3.5 Repackaging and storage
Repackage and store the product carefully in accordance
with the conditions stated below.
HEIDENHAIN | POSITIP 8000 | Installationsanleitung | 09/2018
3.5.1 Repackaging the product
Repackaging should correspond to the original packaging
as closely as possible.
Re-attach all mounting parts and dust protection
caps to the product as received from the factory, or
repackage them in the original packaging as received
from the factory
Repackage the product in such a way that
it is protected from impact and vibration during
transit
it is protected from the ingress of dust or humidity
ID
Place all accessories that were included in the
shipment in the original packaging
Further information:
354770-xx
accessories", Page 22
283273-xx
Enclose all the documentation that was included in the
683110-xx
original packaging
Further information:
683112-xx
documentation", Page 19
1089214-01
223775-01
1089230-02
1089230-03
3.5.2 Storage of the product
1089230-04
Package the product as described above
1089230-01
Observe the specified ambient conditions
1089208-02
Further information:
Inspect the product for damage after any transport or
longer storage times
"Items supplied and
"Storage and distribution of the
If the product is returned for repair to the
Service Department:
Ship the product without accessories,
without encoders and without peripherals
"Specifications", Page 29
23