Kärcher Inno-Foam-Set Bedienungsanleitung Seite 9

! Inno-Foam set: Install the preinstalled
foam nozzle onto the short pipe of the
reversible spray pipe.
Easy-Foam set: Install the preinstalled
foam nozzle instead of the high pres-
sure nozzle onto the spray pipe.
! Tighten foam nozzle with open end
wrench SW 27.
Recommended detergents
RM 57 ASF
Foam cleaner, neutral
Foam detergent for mild dirt, dirt containing
greases, oil and proteins.
RM 58 ASF
Foam detergent, alkali-base
Foam detergent for cleaning floor tiles, roof
tiles and containers.
RM 59 ASF
Foam cleaner, acidic
Foam detergent for cleaning floor tiles,
steel surfaces and containers.
RM 735
Disinfectant
Neutral disinfectant, bactericide / fungicide
/ viruscide.
Operation
! Hang the suction hose on the injector
intot the detergent can.
! Operate the high-pressure cleaner in
the normal way.
1 High pressure
2 Foam
3 Lever
! Inno-Foam set: Set the lever of the re-
versible spray pipe to foam setting.
Note
If you are using a Servopress gun, set it to
full water quantity.
Inno-Foam set: Always set the lever on the
reversible spray pipe to the end position.
! Pull the lever on the handgun.
! Align the flat foam jet by turning the noz-
zle casing.
! Adjust detergent dose on the injector.
A Adjustments
B Detergent dosing in %
9
English