Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Filling with cold water
Start cold water supply.
Wait until the water level has reached the static level
and then stop cold water supply.
Re-insert the cover plate.
Record the disposal in the log book.
Disposal procedure is completed.
Carry out disposal (Direct version)
Remove the cover plate and cordon off to ensure traffic
safety.
Connect the suction hose of the drainage pipe to the
Storz-B coupling.
Start the drainage pipe pumping operation.
Pump away until the outlet structure is exposed and then
stop the pumping operation. Duration depends on the
nominal size.
Clean the inside walls of the tank while pumping off
Restart pumping, clean the inside walls of the tank with a
water hose.
Once the tank has been pumped empty (slurping
noises) , end the pumping off process by the disposal
vehicle.
Disconnect the suction hose of the disposal vehicle from
the Storz B coupling.
Filling with cold water
Start cold water supply.
Wait until the water level has reached the static level
and then stop cold water supply.
Re-insert the cover plate.
Record the disposal in the log book.
Disposal procedure is completed.
016-310
,
,
Installation and operating instructions
31 / 112
Werbung
