Miele PDR 910 G Installationsplan Seite 45

Communication
box
Payment systems
XKM 3200 WL PLT The optional Miele communication module can be used to establish a
Gas type
Designation Test
gas
Natural
gas G20
H (E)
Natural
gas
Natural
gas G25
L (LL)
3B/P G30
Liquid
gas
3P G31
Gas setting values
Floor anchoring
Both of the tumble dryer's front screw feet must be secured to the
floor with the tensioning strips supplied.
Optional accessories
Only use genuine Miele spare parts and accessories with this ma-
chine.
Using spare parts or accessories from other manufacturers will in-
validate the warranty, and Miele cannot accept liability.
The optional communication box allows external hardware from Miele
and other suppliers to be connected to the Miele Professional ma-
chine. External hardware includes, e.g. payment system, peak-load
system, pressure sensor or an external vent flap.
The communication box is supplied with mains voltage by the Miele
Professional machine.
The separately available set consists of the communication box and
fasteners for installation on the machine or on the wall.
This tumble dryer can be fitted with a payment system (optional Miele
accessory). In this case, a Miele Customer Service technician must
programme the relevant settings in the tumble dryer's electronics and
connect the payment system.
data connection between a Miele Professional machine and a data
processor in accordance with the Ethernet or WiFi standard.
Nom- Re- Jet dia- Jet
inal stricted meter pres-
heater heater sure
rating rating ±0.2 m
bar
Nom-
inal
heater
rating
HI
kW kW mm mbar
8.0 6.6 2.6 8.3
8.0 6.6 2.6 12.0
7.5 6.0 1.8 9.0
7.5 6.0 1.8 12.0
en - Installation notes
Jet Gas inlet pressure (mains
pres- pressure)
sure
±0.2 m
bar
Re-
P P
stricted
min
heater
rating
LO
mbar mbar mbar
4.9 17 20
7.1 20 25
25 29
6.0
42.5 50
25 29
8.0
42.5 50
P
n max
mbar
25
30
35
57.5
35
57.5
45