Dometic FRESHWELL FWX4350EHP Montage- Und Betriebsanleitung Seite 32

EN
SET
5. Press the
The under-bench air conditioner starts in the selected mode at the specified time and operates until the second
specified time is reached.
6. Switch the under-bench air conditioner to standby (see
standby).
Canceling timer setting
If the timer has been set, these settings can be canceled as follows:
Press the button 5 times.
The timer symbol disappears. The setting has been canceled.
Activating and deactivating the sleep function
Note The sleep function is deactivated in "Circulating air" (
1. Ensure that the under-bench air conditioner is switched on.
2. Set the required temperature (see
3. Press the
button.
The symbol appears in the remote control display. The sleep function is activated.
4. To deactivate the sleep function press the
Note The sleep function is deactivated if the
Replacing the remote control batteries
Replace the batteries when the
The battery compartment is placed on the back of the remote control.
1. Push down the lid of the battery compartment and slide it open in the direction of the arrow.
2. Insert 2 new batteries (type AAA) into the remote control as indicated in the battery compartment.
3. Close the cover of the battery compartment.
13 Cleaning and maintenance
WARNING! Risk of injury
Any other maintenance work additional to that described here may only be carried out by qualified per-
sonnel who are familiar with the relevant regulations and the risks involved when handling refrigerant and
air conditioning systems.
NOTICE! Damage hazard
• Do not clean the under-bench air conditioner with a high-pressure cleaner.
• Do not use sharp or hard objects or cleaning agents for cleaning the under-bench air conditioner.
30
button to transmit the value to the under-bench air conditioner.
Setting the
symbol is displayed on the remote control display.
Switching the under-bench air conditioner on or to
) and the "Dehumidification" ( ) modes.
temperature).
button again.
MODE
button is pressed.