Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Procedure:
Step 1: Unscrew the fuse-holder on the rear panel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Flash-rate:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
LED type:
Number of LEDs:
Beam angle:
Color temperature:
Dimensions (LxWxH):
Weight:
Accessory:
Safety bond 3x600 black
Please note: Every information is subject to change without prior notice. 05.03.2014 ©
230 V AC, 50 Hz ~
22 W
1-20 Hz
:
45° C
a
(steady state): 55° C
C
0.5 m
0.1 m
10 mm
146 white
11°
6800K
280 x 300 x 210 mm
1.5 kg
No.
58010252
16/16
00082042.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
