Herunterladen Inhalt Inhalt Diese Seite drucken

Description; Features; Installation; Danger Of Fire - EuroLite 500 IR Bedienungsanleitung

Led techno strobe
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DESCRIPTION

Features

Practical LED strobe with various setting possibilites
Flash frequency and microphone sensitivity adjustable
Static light dimmable via rotary control
Sound-control via built-in microphone
With mounting bracket and fixation screws
146 x 10mm LEDs
Infrared-remote control included in delivery
Ideal for party-rooms and household use
Ready for connection via power cord with safety-plug

INSTALLATION

When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Mount the strobe with the mounting-bracket on the desired installation spot. Adjust the desired inclination-
angle via the mounting-bracket and fix the bracket-screws.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The device must never be fixed swinging freely in the room.
Caution: Devices in hanging installations may cause severe injuries when crashing down! If you have
doubts concerning the safety of a possible installation, do NOT install the device!

Attachment

Before attaching the device, make sure that the installation area can hold a minimum point load of 5 times
the device's weight.
The device must only be installed absolutely planar at a vibration-free, oscilation-free and fire-resistant
location. Make sure that the device is installed absolutely planar by using a water-level.
The device must be installed out of the reach of people.
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum
load and the building material.
The device must always be installed via all fixation holes. Do only use appropriate screws and make sure
that the screws are properly connected with the ground.

DANGER OF FIRE!

13/16
00082042.DOC, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis