Hauff-Technik ESH PolySafe Montageanleitung Seite 8

ESH PolySafe
VT75(VT63)
• The ESH PolySafe is to be protected from damage, damp and soiling prior to in-
stallation. Only intact components may be installed.
• The ESH PolySafe must be stored in such a way that it is not exposed to low
temperatures (< 5 °C), high temperatures (> 30 °C) or direct sunlight.
Disposal
If no return or disposal agreement has been concluded, recycle dismantled com-
ponents after they have been properly dismantled:
• Metal remains are to be scrapped according to existing environmental regulati-
ons.
• Dispose of elastomers according to existing environmental regulations.
• Dispose of plastics according to existing environmental regulations.
• Dispose of packaging material according to existing environmental regulations.
• Dispose of hardened expansion resin residues according to existing environ-
mental regulations (household waste/commercial waste).
• Dispose of fully emptied expansion resin packaging according to existing en-
vironmental regulations (yellow (recycling) bin/sack).
8 Art. Nr.: 5090020207 Rev.: 02/2023-08-17