hanseatic HVSWD300DBKC Gebrauchsanleitung Seite 76

Page EN-30 Care and maintenance
Activating brush roller
drying manually
Brush roller drying starts au-
tomatically
self-cleaning.
1. Place the appliance into the
charging station (14).
2. Hold down
button (4) for three seconds.
The display (5) shows the
'Brush roller drying' symbol
The complete brush roller dry-
ing process lasts 4 hours.
To end brush roller drying early:
• Remove the appliance from
the charging station (14).
Cleaning the filter
Health hazard!
after each
Improper handling of the ap-
pliance may result in health
hazards.
■ Do not use the appliance if
the mode
Risk of damage to property!
Improper handling of the fi l-
ter may result in damage.
■ Never dry the fi lter on a
■ Do not use a washing ma-
■ The fi lter must be air-dried
CAUTION
the fi lter is missing or dam-
aged. Otherwise, vacuumed
dust can penetrate the ap-
pliance and escape into the
ambient air.
NOTICE
heater or with a hairdryer
or tumble dryer, etc. Doing
so will make it porous and
may damage it.
chine or dishwasher to
clean the fi lter.
only.