Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.2 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a
qualified professional (not covered by the guarantee).
NOTICE! This product contains a LED light source of energy
efficiency class G according to EU-Regulation 2019/2015.
7. Troubleshooting
Possible cause
1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
1. Incorrect energy supply.
T
1. The appliance has been switched off
for a while.
2. Too much or too hot food in the
appliance.
3. Doors opened too often or too long. 3. Do not open the door too often/too
1. The air outlets may be blocked by
food.
2. The door is not properly closed.
Malfunction
T
HE APPLIANCE DOES NOT WORK AT ALL
T
HE COMPRESSOR DOES NOT WORK AT ALL
HE COMPRESSOR OPERATES FOR TOO LONG
F
ORMATION OF ENCRUSTED ICE
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model plate
with the data of your energy supplier.
1. Check the energy supply.
1. The appliance needs some time to
reach the preset temperature.
2. Remove any hot food.
long.
1. Store the food in another place.
2. Close the door properly.
~ 97 ~
Measure
.
.
.
.
Werbung
