Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connect the power cord with power plug
of the charger
to the socket .
14 ]
[
When the battery pack
Remove the battery pack from the charger
. Then disconnect the power cord with
[
14 ]
power plug
of the charger from the socket .
[
15 ]
˜ Adjusting the base plate
(Fig . E)
m
WARNING!
Always switch the product off, remove
the battery pack
product
cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
m
CAUTION! RISK OF INJURY!
Remove the saw blade from the product
u
before adjusting the base plate
(see "Inserting/removing the saw blade") .
Do not use the product without having
u
inserted the base plate
To adapt to the workpiece, the base plate
be adjusted and swivelled to different positions .
Unlock the base plate
lever
in a counter-clockwise direction .
1 ]
[
36 GB/IE
[
15 ]
is fully charged:
8 ]
[
and let the
[
8 ]
4 ]
[
.
[
4 ]
can
4 ]
[
: Turn the locking
[
4 ]
Adjust the desired position of the base plate
by pushing it in or pulling it out .
[
4 ]
Lock the base plate
in a clockwise direction .
1 ]
[
˜ Inserting/removing the saw
blade
m
WARNING!
Always switch the product off, remove
the battery pack
product
cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
m
CAUTION! RISK OF INJURY!
Do not use any blunt, bent or damaged
u
saw blade .
Always install a suitable saw blade for the
u
job .
Inserting the saw blade
(Fig . F)
Turn the chuck ring
direction .
Insert the saw blade into the saw blade
holder
.
3 ]
[
Release the chuck ring
its original position .
Before use: Pull on the saw blade and check
if it is inserted safely and tightly .
: Turn the locking lever
4 ]
[
and let the
8 ]
[
in a counter-clockwise
2 ]
[
and let it return to
2 ]
[
Werbung
Inhaltsverzeichnis
