Warranty Coverage; Maintenance Table - EMAK KTK 102H Serie Gebrauchsanweisung

or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualified persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
• Only Authorised Service Centres can carry
out guaranteed repairs and maintenance.
• Non-original parts and attachments are
not approved; use of non-original spare
parts and attachments will jeopardise
the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
• Genuine spare parts are supplied by
Authorised Assistance Centres and Dealers.
• It is advisable to send your machine
once a year to an Authorised Service
Centre for servicing, assistance
and safety device inspection.

12. WARRANTY COVERAGE

The warranty covers all material and
manufacturing defects. The user must

13. MAINTENANCE TABLE

Operation
MACHINE
Safety checks/check controls
Tyre pressure check
Check the rear/lateral discharge guards. Check the
grass catcher bag and lateral discharge chute.
General cleaning and inspection
Checking for any damage to the machine. If
necessary, contact the Authorised Service Centre.
Charging the battery
Complete bolt and screw check
Cutting device positioning and sharpening check
Transmission belt check
Cutting device control belt check
Brake regulation and check
Drive regulation and check
Cutting device gear and brake check
General lubrication
Replacing cutting device
Replacing the transmission belt
Replacing the cutting device control belt
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover
damages caused by:
• Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of attachments not supplied or
approved by the manufacturer.
The warranty does not cover:
• Normal wear and tear of consumables,
such as drive belts, headlights, wheels,
blades, safety bolts and wires.
• Normal wear and tear.
• Engines. Engines are covered by
the warranty provided by the relative
manufacturer in compliance with the
specified terms and conditions.
The purchaser is protected by his own national
legislation. The purchaser's rights envisaged
by the national laws in his own country are
not in any way restricted by this warranty.
Interval (hours)
First time Subsequently every
Before each use
Before each use
Before each use
EN - 26
After each use
After each use
Before storage
25
25
25
25
25
25
25
25
100
-
-
Paragraph
/ Notes
par. 6.2
par. 6.1.3
par. 6.1.4
par. 7.6
-
par. 7.5
***
***
***
***
***
***
****
***
** / ***
** / ***