Inhaltsverzeichnis
Werbung
4 Common Practice Commands
4.1 HART-Command 33 : Read Transmitter Variables
Request
Data Bytes
Response
Data Bytes
#2..#5
#8..#11
#12
#13
#14..#17
#18
#19
#20..#23
Response
Codes
Bemerkung
4.2 HART-Command 34 : Write Primary Variable Damping Value
Request
#0..#3 Damping Value, IEEE 754
Data Bytes
Response
#0..#3 Actual Damping Value, IEEE 754
Data Bytes
Response
Codes
14
#0
Transmitter Variable assigned to Slot #0
#1
Transmitter Variable assigned to Slot #1
#2
Transmitter Variable assigned to Slot #2
#3
Transmitter Variable assigned to Slot #3
#0
Transmitter Variable assigned to Slot #0
#1
Slot #0 Unit Code
Slot #0 Variable, IEEE 754
#6
Transmitter Variable assigned to Slot #1
#7
Slot #1 Unit Code
Slot #1 Variable, IEEE 754
Transmitter Variable assigned to Slot #2
Slot #2 Unit Code
Slot #2 Variable, IEEE 754
Transmitter Variable assigned to Slot #3
Slot #3 Unit Code
Slot #3 Variable, IEEE 754
0
No Command Specific Error
2
Invalid Selection
5
Incorrect Byte Count
Transmitter Variables:
0
No Command Specific Error
3
Passed Parameter to Large
4
Passed Parameter to Small
5
Incorrect Byte Count
Es lassen sich vier Variablen über die implementierten
Slotkommandos auslesen (siehe Tabellen 5.3.3 und
7.1.3)
Revision
Revision
Werbung
Inhaltsverzeichnis
