Backrest Height - Vermeiren Verso Gebrauchsanweisung

EN
NL
3.6.2 Mounting or removing the armrests
To remove the armrest:
1. Grasp the arm pad and pull the armrest gently out of the
armrest support.
3.6.3

Backrest height

The backrest height can be adjusted into 5 positions.
1. Remove the star knob (1).
2. Slide the backrest upholstery up/down to the desired height.
Make sure that the hole for the star knob in the frame tube
aligns with one of the holes in the upholstery.
3. Replace the star knob and retighten.
3.6.4 Backrest support
The backrest of the wheelchair has a suspension system with adjustable Velcro straps, to adjust
the flexibility of the backrest.
1. Pull the backrest cushion from the Velcro straps of the
backrest.
2. Loosen the Velcro straps.
3. Pull the respective strap to the desired position. The
tension of the individual belts can be varied and the
desired support of the back can be set.
4. Place the back cushion back over the backrest starting
at the front and ending at the back.
5. Secure the Velcro connections by pressing the cushion against the backrest with your hand.
6. Make sure that all straps are secured with Velcro.
3.6.5 Push handle height
The push handles can be adjusted over a distance of 60 mm:
1. Loosen the star knob (1) .
2. Move the handgrip up/down to the desired height.
3. Retighten the star knob (1) .
4. Repeat for the other handle. Make sure that both handles are
firmly secured.
The armrests of the wheelchair can be mounted by following
instructions.
1. Mount the armrest  in the armrest support  until the
screw  fits in the sleeve .
2. Make sure the armrest  is firmly fixated.
14
Verso
2023-06
Using your wheelchair
1
1