Herunterladen Inhalt Inhalt Diese Seite drucken

Brake And Free-Wheel Lever; Moving To/From Wheelchair - Vermeiren Verso Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Verso:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 73
EN
NL
To unlock the powerchair:
1. Use the On/Off button to switch the control system on. The maximum speed / profile
indicator will be rippling up and down.
2. Deflect the joystick forwards until the control system beeps.
3. Deflect the joystick in reverse until the control system beeps.
4. Release the joystick, there will be a long beep.
5. The powerchair is now unlocked.
3.4

Brake and free-wheel lever

CAUTION
 Only operate the free-wheel lever when your wheelchair is turned OFF. An attendant should
operate the free-wheel lever. NEVER operate it from sitting position.
 Do not use the free-wheel mode on slopes and inclinations.
Make sure that the free-wheel lever is in its braking position BEFORE switching the
wheelchair ON. Electromagnetic brakes do NOT function if the wheelchair is in free-wheel
mode. This is indicated on the operating console. Driving is not possible.
Your wheelchair is equipped with electromagnetic brakes. The working of the brakes depends on
the position of the free-wheel lever (1).
The EM brakes function automatically, only if free-
wheel lever (1) is in braking position. In this situation,
the brakes start braking if:
 the wheelchair is OFF;
 the wheelchair is ON and the joystick is released.
Releasing the joystick makes the wheelchair stop
gently and activates the brakes.
Operation of free-wheel lever:
 Turn levers UP to put the wheelchair in free-
wheel mode. Now, the motor is disconnected.
The wheelchair can be moved manually.
 Turn levers DOWN to connect the motor to the
drive. This should be done before starting the
wheelchair.
3.5

Moving to/from wheelchair

CAUTION
 In case you cannot perform the transfer in a safe manner, ask someone to assist you.
 Do not stand on the footplate(s) during transfer into or out of the wheelchair.
Transfer
1. Position the wheelchair as close as possible to you when sitting in your chair, couch, seat or
bed.
2. Apply the brakes by turning the free-wheel lever to braking position, see § 3.4.
3. Fold the footplate(s) upwards to prevent standing on them.
4. If necessary, remove one armrest to make room, see § 3.6.2.
5. Transfer to/from the wheelchair using the strength of your arms or with the help of attendant(s)
or lifting equipment.
Risk of injuries or damage
Risk of injuries or damage
1
12
Verso
2023-06
Using your wheelchair

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis