Guarantee Restrictions - HAPRO Topaz 24 Combi HB584 Bedienungsanleitung

English
8 8
1 Remove the mains plug from the wall socket.
2 Undo the screws and remove the two end covers of the canopy and of the couch. (Fig. 31)
3 Pull the acrylic sheets completely out of the appliance. (Fig. 32)
The lamps and starters are now accessible.
Note:If you wish, you can now also clean the inside of the acrylic sheets (see chapter 'Cleaning').
4 Turn the lamps slightly to the left or to the right until they unlock.
5 Pull the lamps out of their holders.
6 Turn the starters slightly to the left and pull them out.
7 To insert new lamps and/or starters, follow the above instructions in reverse order and direction.
8 Slide the acrylic sheets back into the canopy and the couch.
9 Put the end covers back onto the canopy and the couch and fix them with the screws.
HB 585 only: The appliance has a counter that records the operating hours of the tanning lamps.
Set the time to 00 and press the start button
,
Multiply the figure on the dispay by a factor of 10 to get the actual total number of operating hours. For example: if the display reads 34, the
total number of operating hours is 340.
Note:The operating hours disappear from the display as soon as you release the I button.
To reset the hour counter, press the start button
,
the > button simultaneously until the operating hours disappear from the display (00 becomes visible).
Environment
The lamps of the appliance contain substances that can be harmful to the environment. When you discard the lamps, do not throw them
,
away with the normal household waste, but hand them in at an official collection point.
Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for
,
recycling. By doing this, you help to preserve the environment. (Fig. 33)

guarantee restrictions

The following parts are not covered by the terms of the international guarantee:
- tanning lamps
- acrylic sheets and the costs of cleaning the acrylic sheets
languagE-chaptEr-titlE
I for at least 2 seconds. After the beep, the operating hours appear on the display.
I until the operating hours appear on the display. Then press the start button I and