Troubleshooting; Spare Part Order - Holzmann MSM 100L Bedienungsanleitung

Position A: Belt tensioned
Position B: Belt loosened

6 TROUBLESHOOTING

Disconnect the machine from the power supply!!!
Problem
Machine does not start
Belt does not have full speed
Machine vibrates strongly
Belt starts to get damaged
fastly

7 SPARE PART ORDER

With original Holzmann spare parts you use parts that are attuned to each other and shorten
the installation time and elongate your machines lifespan.
The installation of non-original parts renders warranty null and void.
So you always have to use original spare parts.
You find the order address in the preface of this operation manual.
HOLZMANN Maschinen Austria
Operation manual metal grinding machine MSM 100L
Possible cause
Problem with the connec-

tion
Fuse defect, cable defect

ON/OFF switch defect

Motor does not receive

full power for following reasns:
1 phase missing
Weak/unstable power supply
Feed cable too long or to weak
Uneven underground

Motor housing loose

Belt tension lever loose or

broken
Belt installed in the

wrong direction!
I M P O R T A N T
www.holzmann-maschinen.at
solution
Check with electrician
Let check with electrician
Level the underground
Check and tighten
Let be replaced
Check the arrow on the backside
oft he belt. Its direction must
agree with the running direction!
metal grinding machine MSM 100L
Page 10