Samsung MS23A7318A-Serie Benutzerhandbuch Seite 172

Installation
RIGHT SIDE
CENTRE MARK
12 English
User_MS23A7318AK_E2_DE68-04716C-00_EN.indd 12 User_MS23A7318AK_E2_DE68-04716C-00_EN.indd 12
5. Turn the template sheet 180 degrees.
6. Align the 'CENTRE MARK', now on the
left side of the template sheet, with the
centre mark on the cabinet.
7. Mark the screw hole locations on the
cabinet.
8. Use the provided screws (Type A) to
fasten two Trim holders to the left and
right side of the microwave.
• Check the markings (L: left, R: right)
on the brackets to fasten them on
the correct side.
9. Insert the microwave into the cabinet.
Then, align the Base bracket holes with
the marking from step 4 and 7.
10. Use a 3 mm drill to make holes in the
cabinet to fasten the Base brackets.
Then, fasten with the provides screws
(Type B).
Ø 3mm
11. Attach the Trim, and then connect all
electrical cables. Check if the appliance
works properly.
5/18/2022 1:06:15 PM 5/18/2022 1:06:15 PM