Profile Characteristic - Balluff BES M12EG1-L01C80F-S04G-L04 Konfigurationsanleitung

BES M12EH1-L01C40B-S04G-L04 / BES M12EG1-L01C80F-S04G-L04 /
BES M18EH1-L01C80B-S04G-L04 / BES M18EH1-L01C12F-S04G-L04
Inductive sensors
6
System Functions (continued)
6.8

Profile Characteristic

6.8.1 Description
Profile Characteristic is a readable parameter that provides
information about which IO-Link profiles are supported. It
is used mainly to allow profile function modules of the
control unit to detect which profile or functions on the
device are available.
This parameter is defined in the IO-Link specification.
6.8.2 ISDU
Name Index
Profile 0x000D (13)
Characteristic
Tab. 6-27: Profile Characteristic – ISDU
The parameter can be read via subindex 0 and consists of
multiple profile indices and function classes (each 16-bit
values).
If a profile ID is specified, this means that all included
function classes are supported. If only sub-functions are
supported, these are output explicitly as an individual
function class.
This device supports the following profiles:
Variant Profile ID /
Function
Class ID
1 (LSSC) 0x0001
0x4000
0x8000
0x8001
0x8003
0x8004
2 (ADSS) 0x0004
0x0005
0x0006
0x4000
3 (CCM) 0x4000
Tab. 6-28: Profile characteristics – supported profiles and function
classes
94 english
Subindex Access
0 R
Name
Generic Profiled Sensor
Identification & Diagnosis
Device Identification
Multi-channel, two setpoint
switching sensor
Device Diagnosis
Teach Channel
Adjustable Switching Sensor,
single value teach
Adjustable Switching Sensor,
two value teach
Adjustable Switching Sensor,
dynamic teach
Identification & Diagnosis
Identification & Diagnosis
Length Data Type
LSSC: 12 bytes UINT16[]
ADSS; 8 bytes
CCM: 2 bytes
Data Storage Default
n/a –