Diagnosis Suppression - Balluff BES M12EG1-L01C80F-S04G-L04 Konfigurationsanleitung

BES M12EH1-L01C40B-S04G-L04 / BES M12EG1-L01C80F-S04G-L04 /
BES M18EH1-L01C80B-S04G-L04 / BES M18EH1-L01C12F-S04G-L04
Inductive sensors
6
System Functions (continued)
6.2

Diagnosis Suppression

6.2.1 Description
Diagnosis suppression is used to suppress diagnosis
messages from the device. There are two possibilities here:
– Diagnosis suppression level that permits a general
suppression of messages of a certain level (message,
warning, error).
– Event-code suppression of up to 5 events as a list or
via a teach-in.
6.2.2 ISDU
Name
Diagnosis Level
Configuration
Event Code Suppression 0x0071 (113)
Event Code Suppression
Event Code Suppression
Teach-in
Event Code Suppression
Delete
Tab. 6-4: Diagnosis suppression – ISDU
6.2.3 Diagnosis Level Configuration
This parameter offers the possibility to select an output
level for events.
This index is part of the data management and is stored in
non-volatile memory.
Value Diagnosis Level
0 All events
1 Warnings and errors
2 Error
3 No events
Tab. 6-5: Diagnosis suppression – Diagnosis level configuration
80 english
Index Subindex Access
0x0070 (112) 0
0
1...5
0x0072 (114) 0
0x0073 (115) 0
Length Data Type
R/W 1 byte UINT8(ENUM)
R/W 10 byte
R/W 2 bytes UINT16
W 2 bytes UINT16
W 2 bytes UINT16
Descriptions
All diagnosis messages are reported (default setting).
All warnings and errors are reported – messages are
suppressed.
Only events of type error are reported.
All diagnosis messages from the device are suppressed.
Data Storage Default
Yes 0
Yes
No 0
n/a –
n/a –