Overview Of Io-Link Data And Functions; Device Variants; Process Data Profiles - Balluff BES M12EG1-L01C80F-S04G-L04 Konfigurationsanleitung

BES M12EH1-L01C40B-S04G-L04 / BES M12EG1-L01C80F-S04G-L04 /
BES M18EH1-L01C80B-S04G-L04 / BES M18EH1-L01C12F-S04G-L04
Inductive sensors
3
Overview of IO-Link Data and Functions (continued)
3.2

Device Variants

The following three variants are available, which differ in
their process data profiles:
– LSSC
– AdSS
– Comprehensive Condition Monitoring
The functions remain unchanged in the process. The
switching profile is influenced by a change between LSSC
and AdSS. Only one switching point is available in the
AdSS profile.
Variant Device ID
Variant 1 (LSSC) 0x020404
Variant 2 (ADSS) 0x020405
1)
Variant 3 (CCM) 0x020406
Default
1)
Tab. 3-1: Device Variants
3.3

Process Data Profiles

See section 6.7 Process Data Info and Configuration on
page 91.
Variant 1 (LSSC)
PD Input
Bit 7 Bit 6
System error Reserved
Tab. 3-2: Process data profile for PD Input – Variant 1 (LSSC)
PD Output
No PD-Output data available.
Variant 2 (ADSS)
PD Input
Bit 7 Bit 6
System error Reserved
Tab. 3-3: Process data profile for PD Input – Variant 2 (ADSS)
PD Output
No PD-Output data available.
www.balluff.com
Baud rate
PDInput
COM3 (230.4 kbits/s)
COM3 (230.4 kbits/s)
COM3 (230.4 kbits/s) 17 byte
Byte 0
Bit 5 Bit 4
Transducer Signal Quality
out of range Bad
Byte 0
Bit 5 Bit 4
Transducer Signal Quality
out of range Bad
No. of No. of IO-Link protocol
PDOutput
1 byte –
1 byte –
1 byte
Bit 3 Bit 2
Reserved Reserved
Bit 3 Bit 2
Reserved Reserved
Minimum
version cycle time
1.1.2. 2 ms
1.1.2. 2 ms
1.1.2. 2 ms
Bit 1 Bit 0
SSC2 SSC1
(LSSC2) (LSSC1)
Bit 1 Bit 0
Reserved SSC1
(ADSS1)
english 9