Pin Assignment - Balluff BES M12EG1-L01C80F-S04G-L04 Konfigurationsanleitung

BES M12EH1-L01C40B-S04G-L04 / BES M12EG1-L01C80F-S04G-L04 /
BES M18EH1-L01C80B-S04G-L04 / BES M18EH1-L01C12F-S04G-L04
Inductive sensors
6
System Functions (continued)
6.5

Pin Assignment

6.5.1 Description
Two different internal digital signals are available that can
be output or read in at the pins of the device.
Pin 4 and pin 2 can be configured with the following
functions:
Pin 4:
Digital Output
Pin 2:
– Digital Output
– Digital Input
6.5.2 ISDU
Name Index
Pin 4 Function 0x0090 (144)
Behavior IO-Link
Mode
Pin 4 Digital 0x0091 (145)
Configuration
1)
Signal Source
Logic
Type
Pin 2 Function 0x0093 (147)
Behavior IO-Link
Mode
Pin 2 Digital 0x0094 (148)
Configuration
1)
Signal Source
Logic
Type
1) The settings in the digital configuration are only used if the pin was configured as a digital output or digital input.
Tab. 6-11: Pin assignment – ISDU
The settings of this device function are not variant-
specific and do not change in the event of a
variant change (e.g. from ADSS to LSSC). As a
result, the Signal Source setting must be adjusted
to the selected profile if necessary.
84 english
Subindex Access Length
0 R/W 2 bytes
1 R/W 1 byte
2 R/W 1 byte
0 R/W 4 byte
1 R/W 2 bytes
2 R/W 1 byte
3 R/W 1 byte
0 R/W 2 bytes
1 R/W 1 byte
2 R/W 1 byte
0 R/W 4 byte
1 R/W 2 bytes
2 R/W 1 byte
3 R/W 1 byte
Data Type Data Storage
Yes
UINT8(ENUM) No
UINT8(ENUM) No
Yes
UINT16(ENUM) No
UINT8(ENUM) No
UINT8(ENUM) No
Yes
UINT8(ENUM) No
UINT8(ENUM) No
Yes
UINT16(ENUM) No
UINT8(ENUM) No
UINT8(ENUM) No
Default
0x00 Inactive
0x01 digital
output
0x0038 ADSS 1
0x00 normal
0x02 push pull
0x01 normal
operation
0x01 digital
output
0x0038 ADSS 1
0x00 normal
0x00 PNP