Balluff BES M12EG1-L01C80F-S04G-L04 Konfigurationsanleitung Seite 152

BES M12EH1-L01C40B-S04G-L04 / BES M12EG1-L01C80F-S04G-L04 /
BES M18EH1-L01C80B-S04G-L04 / BES M18EH1-L01C12F-S04G-L04
Inductive sensors
5
Secondary Device Functions (continued)
5.5.4 ISDU
Minimum, Maximum, Average and Moving
Average outputs are output in FLOAT32 format.
Before they are processed further and converted
from FLOAT32 to INT32 or UINT32, the output
signal must be checked to determine whether it
is larger than INT32_Max or UINT32_Max. If it is
larger, data type UINT64 or INT64 should be
used.
Name
Statistics Data Configuration
Input Signal
Time Period Unit
Time Period Value
Moving Average Window
Unit
Moving Average Window
Value
Statistics Data Output
Minimum
Maximum
Average
Moving Average
Number Of Samples
Status
Tab. 5-21: Basic statistics – ISDU
Statistics Data Configuration: Input Signal
All data types of process data objects can be used for
input configuration, with the exception of Boolean. The
respective Object IDs can be found in the respective
section on the function. Default value is 0, this corresponds
to "no object".
54 english
Index Subindex Access
0x0426 0 R/W
(1062)
1 R/W
2 R/W
3 R/W
4 R/W
5 R/W
0x0427 0 R
(1063)
1 R
2 R
3 R
4 R
5 R
6 R
Length Data Type
8 byte
2 bytes UINT16(ENUM)
1 byte UINT8(ENUM)
2 bytes UINT16
1 byte UINT8(ENUM)
2 bytes UINT16
21 Byte
4 byte FLOAT32
4 byte FLOAT32
4 byte FLOAT32
4 byte FLOAT32
4 byte UINT32
1 byte UINT8
Data Default
Storage
Yes
No 0
No Seconds
No 1
No Measurement
values
No 100
n/a
n/a –
n/a –
n/a –
n/a –
n/a –
n/a –