Troubleshooting; Replacement Parts - FLORABEST FALHS 18 A1 Originalbetriebsanleitung

Troubleshooting

DANGER! BODILY INJURY!
► Cutting wounds, if the hedge trimmers is switched on accidentally.
► Before correcting faults, pull off the battery pack
bar .
Problem Possible cause
Hedge trimmer
Battery pack
will not start.
Battery pack
onto the handle.
Cutter bar
Cutter bar
Uneven cut
Cutter bar
Hedge trimmer
ON/OFF switch
cannot be
switched off.

Replacement parts

Replacement parts can be ordered directly from the service centre. Please provide the following details
when making an order: machine type and item number.
FALHS 18 A1
and push the protective case
empty.
not correctly pushed
dirty (e.g. due to resin).
blocked.
blunt or damaged.
is jammed.
Troubleshooting
Charge battery pack
Push the battery pack
so that the release button
place.
Clean the cutter bar
Remove obstruction.
Have the cutter bar
Service Centre.
Remove battery pack
ON/OFF switch .
onto the cutter
.
onto the handle
clicks into
.
replaced by the
and free the
31
GB