Buttons; First Start - VDO Cyclecomputing R5 GPS Handbuch

Buttons

The R5 GPS has 3 buttons.
The functions of the buttons are described
in the following graphic:

First Start

1 2
If you want to use the device for the first time, hold down the START / Menu button for 5 seconds
This will take you to the wake up menu in which you can make all important settings.
You have 2 options for this:
1. Connect the smartphone and set the R5 GPS with the SIGMA RIDE app
2. Make the settings manually on the R5 GPS
To connect the smartphone, please follow the instructions in the
To adjust a setting manually, select the desired value with the + or – button and confirm this by
pressing the START button.
At the end of the setting you have the option of connecting sensors such as a heart rate chest strap,
please follow the instructions in the
When all settings have been made, you can use the device. To assemble the device, please follow the steps in the
BUTTON
One page backward

Decrease value

START/STOP/MENU Button
Start training

Stop training

Confirm input

One menu level down

Switch on the device (press for 3s)

Wake up „Shipping Mode" (press for 5s)

Press and hold button:
Open main menu (if training is stopped or not yet started)

Open quick menu (if training is active or paused)

Close the main menu

Close the quick menu

Scan Code with the SIGMA RIDE App
YES
or
NO
3
4
chapter Connecting a smartphone.
chapter Connecting the sensor.
4
1
.
2
BUTTON
One page forward

Increase value

Press and hold button:
Save and reset training values

5
SIGMA RIDE App
The app offers you many functions for setting up
and customising the R5 GPS. For more information
on the app functions, see the „SIGMA RIDE app" page.
chapter Installation.
TIP